• Model NO.：M42 41x1.3mm 4,6TPI
• Type：Band Saw
• Hardness：HRC67-69
• Material：High-Speed Steel
• Tpi：4,6tpi
• Appllication：Caron Steel, Ss and Alloy Steel Cutting.
• Delivey Time：4-6 Weeks After Order.
• Transport Package：Pallet
• Specification：41x1.3mm 4,6TPI
• Trademark：FUWEISI
• Origin：China
• HS Code：8202911000
• Production Capacity：2500000m ,Month

Specifications
Teeth forms 
10/14 
8/12 
6/10 
5/8 
4/6 
3/4 
2/3 
1.4/2 
1/1.5 
1.7/2.5 
0.75/1 
0.75/1.2527mmx0.9    OK  OK  OK OKOK OK OK     34mmx1.1    OK  OK  OK OKOK OK OK     41mmx1.3    OK  OK  OK OKOK OK OK  OK   OK    OK  54mmx1.6  
    OK OK  OK   OK    OK    OK     OK67mmx1.6      OK OK  OK   OK    OK    OK     OK80mmx1.6      OK OK  OK   OK    OK    OK     OKFront AngleThe range of the cutting materialSteel typesNote0°1.the profile angle is bigger and the strength is higher, so it's suitable for cutting different kinds of the material
 It's better to choose the bigger front tooth agnle when the stiffness for the procee system  is poor or the power for the saw machines is shortage0°~5°1.suitable for cutting brittle materials;Such as: gray cast iron,
High speed steel and chilled cast iron, tool steel, alloy steel, spring steel, high quality carbon structural steel, bearing steel, steel, martensite stainless steel and heat resistant steel
(HT200,65Mn,W18Cr4V,T12,50Cr,60Si2MnA,1Cr12,1Cr13,GCr15)2.suitable for cutting hard material;3.Suitable for interrupted cutting or the forging ,casting with crustaceous;4.applicable to small section,thin walled pipe6°~10°1.applicable to the workpiece material strength,low hardness, and good plasticitySuch as: ordinary carbon structural steel, high quality carbon structural steel, alloy steel, carbon tool steel and austenitic stainless steel, nodular cast iron, nonferrous metals
(Q235-A,20,30,45,T10,40Cr,20CrMo,1Cr18Ni9Ti,Cu
And so on)
 2.suitable for cutting solid material,thick walled pipes



If you want to know more about our products,please contact us via e-mail or Wechat as below: